Menu

Surging? Misfire?

  • Creator
    Topic
  • #463699
    sjrobinsonsjrobinson
    Participant

      So its happening again- worse. Ima just copy and post my question from yahoo answers cuz I’m too lazy to explain it all.

    Viewing 15 replies - 16 through 30 (of 98 total)
    • Author
      Replies
    • #463715
      EricTheCarGuy 1EricTheCarGuy
      Keymaster

        Not sure, I actually have some very good fuel pressure gauges one is from Honda in fact.

        #463716
        sjrobinsonsjrobinson
        Participant

          Sure thing, thank. Ill look into harbor freight. What am I looking to ‘tap’ into for the test since the filter is kinda hard to get to. Or is that the spot just like shown in your performance vid?

          #463717
          dreamer2355dreamer2355
          Participant

            There should be a schrader valve for the gage to plug into for testing fuel pressure. Make sure you test it KOEO an KOER with throttle blips.

            #463718
            EricTheCarGuy 1EricTheCarGuy
            Keymaster

              Quoted From dreamer2355: _x000D_
              _x000D_
              There should be a schrader valve for the gage to plug into for testing fuel pressure. Make sure you test it KOEO an KOER with throttle blips.

              _x000D_
              _x000D_
              Not on Honda’s for those you need to remove the banjo fit

              #463719
              sjrobinsonsjrobinson
              Participant

                Hmmm. I’m looking it up. A video would be nice. I see that some instructions say to unscrew that bolt thats on top of the filter and stick the gauge in there. That seems pretty straight forward. Is that what I have to do? just with the right attachment fo

                #463720
                fitonefitone
                Participant

                  Quoted From EricTheCarGuy: _x000D_
                  _x000D_
                  Not on Honda’s for those you need to remove the banjo fitting on the fuel rail itself to tie into the system for pressure testing.

                  _x000D_
                  _x000D_
                  Note Eric’s advise “remove the banjo fitting on the fuel rail

                  #463721
                  sjrobinsonsjrobinson
                  Participant

                    Fuel rail is what the injectors are attached to? I think I saw a bolt on the end of that. Although the filter is pretty easy to reach. Thats much easier. Now to find the guage…

                    #463722
                    sjrobinsonsjrobinson
                    Participant

                      I called a honda dealer and napa and they said there was no specific attachment

                      #463723
                      fitonefitone
                      Participant

                        Quoted From sjrobinson: _x000D_
                        _x000D_
                        Fuel rail is what the injectors are attached to? I think I saw a bolt on the end of that. Although the filter is pretty easy to reach. Thats much easier. Now to find the guage…

                        _x000D_
                        _x000D_
                        Yes, exactly. Never ne

                        #463724
                        dreamer2355dreamer2355
                        Participant

                          Quoted From sjrobinson: _x000D_
                          _x000D_
                          Fuel rail is what the injectors are attached to? I think I saw a bolt on the end of that. Although the filter is pretty easy to reach. Thats much easier. Now to find the guage…

                          _x000D_
                          _x000D_
                          Yes. There should be a

                          #463727
                          fitonefitone
                          Participant

                            See if this helps http://www.ehow.com/how_12148239_check-fuel-pressure-1997-honda-accord.html_x000D_
                            It has PSI specs included. As stated earlier by Eric, no schrader port on

                            #463725
                            sjrobinsonsjrobinson
                            Participant

                              Ok, I’m just looking around for an inexpensive one when I have the money. I’m also waiting for my haynes

                              #463726
                              dreamer2355dreamer2355
                              Participant

                                For the fuel pressure PSI, you can probably find that if you look around on Google. Also, Autozone has some free repair information where you may or may not be bale to find the specs you need.

                                #463728
                                sjrobinsonsjrobinson
                                Participant

                                  Whats the name of the attachment I need? I can’t find anything that will say.

                                  #463729
                                  EricTheCarGuy 1EricTheCarGuy
                                  Keymaster

                                    Quoted From dreamer2355: _x000D_
                                    _x000D_
                                    Yes. There should be a schrader valve somewhere on the fuel rail to attach your fuel pressure gage. If not, you simply just need to tee into the fuel line.

                                    _x000D_
                                    _x000D_
                                    There is NO schrader valve on a Honda fuel

                                  Viewing 15 replies - 16 through 30 (of 98 total)
                                  • You must be logged in to reply to this topic.
                                  Loading…
                                  toto togel situs toto situs toto