Menu

Stratus Rear Ball Joint replacement help

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › Stratus Rear Ball Joint replacement help

  • Creator
    Topic
  • August 14, 2014 at 9:17 pm #612835
    EthanEthan
    Participant

      Hello,

      I’m needing to replace the rear upper ball joints on an 02 Dodge Stratus ES sedan. I’m curious if there are instructions that could be posted for this?

      Any special tools needed?

      Thank you!

    • Creator
      Topic
    Viewing 3 replies - 1 through 3 (of 3 total)
    • Author
      Replies
    • August 15, 2014 at 12:27 am #612863
      Aaron AbajianAaron Abajian
      Participant

        You will need to rent a ball joint removal / installation tool from autozone or some other chain parts store. Attached are the alldata instructions. Good luck.

        Attachments:
        August 16, 2014 at 2:41 am #613068
        EricTheCarGuy 1EricTheCarGuy
        Keymaster

          [quote=”Aaron A.” post=107978]You will need to rent a ball joint removal / installation tool from autozone or some other chain parts store. Attached are the alldata instructions. Good luck.[/quote]

          Nice post!

          August 16, 2014 at 9:07 pm #613217
          BillBill
          Participant

            I just did that repair at work recently. As stated you will need a ball joint press and a jack to raise the suspension to aid in the installation. It’s not a difficult job at all.

          • Author
            Replies
          Viewing 3 replies - 1 through 3 (of 3 total)
          • You must be logged in to reply to this topic.
          Loading…