Serpentine Belt Tool

[Andy]

Hi Eric the Car Guy. You didn’t mention what is the best tool in removing serpentine belt or retracting the tensioner. Since the space is so small and deep to get in for a honda crv 2009-2011. Where can I buy a good one? Thank you.

Topic

[Its me]

This is what I use..

http://m.craftsman.com/craftsman-serpentine-belt-tool/p-00941831000P

Harbor freight also has one for a bit less

http://m.harborfreight.com/serpentine-belt-tool-kit-66344.html

FWIW this tool is helpful but not always necessary. .

https://store.snapon.com/Belt-Tensioning-Tools-Tool-Bel-Tensioning-General-Use-Blue-Point–P873112.aspx

Cheers

Karl

[Frank Heiser]

Personally, I’d just go Harbor Freight for that. After all, it’s just a solid stick of metal. Most of them are going to be made in China anyway unless you go for one of the ridiculously priced brands. I think you can also rent them at Autozone, etc.

I just use a 3/8 ratchet with a box-end wrench slipped over the handle, does the exact same job, plus you can rotate the ratchet to adjust the arc.

[Author]

Replies