replace valve seals

[Yosef]

Hello,

I have a car model: Suzuki swift sedan 2003.
VIN:TSMMAH35S30892734
Engine model: G13B.
100000Miles

I think engine is burning oil because of the following behaviors / tests:

1. Need to fill oil recently (no oil leak to the floor).
2. White smoke from exhaust, when kick down throttle, after long time engine vacuum.
3. Color of spark plugs (between yellow and orange).
4. Wet and dry compression test – pass – no suspect piston ring problem.

From the above, my conclusion is: problem with valve seals.

Reading the car spec. follow me to understand, that replace valve seals: DOES NOT NEED to open head of combustion chamber?

Does it correct?

Rgds.

Topic

[Todd Smith]

That is correct.

Pressurize the combustion chamber, with air, while the piston is at top travel. This will prevent the valve from dropping into the combustion chamber while you replace the seals.

[Author]

Replies