Power steering

This topic has 4 replies, 3 voices, and was last updated 8 years ago by zero.

Creator

Topic
February 12, 2017 at 12:08 am #876344
Jesse
Participant
Just finished installing both high pressure/return hoses on my 04 impala SS. Can anyone tell me the procedure to refilling the system with fluid back to normal operating condition please?
Creator

Topic

Viewing 4 replies - 1 through 4 (of 4 total)

Author

Replies
February 12, 2017 at 5:09 am #876351
dripper
Participant
put fluid in and crank engine up. turn steering wheel all the way to the left and right several times to get air out of system. good luck
February 12, 2017 at 5:46 am #876354
Jesse
Participant
Am I suppose to bleed/flush the system as well or is it not necessary?
February 12, 2017 at 6:54 am #876355
dripper
Participant
turning the wheel all the way left and right all the way will bleed the system that all necessary.
February 12, 2017 at 12:48 pm #876357
zero
Participant
With the front wheels in the air, cycling the wheels from left to right a few times, before you start the engine, will expel most of the air from the system. There will still be some air in it, but it should naturally bleed out rather easy once the system is pressured and the wheels cycled.
Author

Replies

Viewing 4 replies - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Loading…

toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/

situs toto situs toto