Menu

p0344

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › p0344

  • Creator
    Topic
  • June 22, 2015 at 6:07 pm #667324
    weswes
    Participant

      Camshaft Pos Sens A Circ Interm Bank1 or Single Sens code came on, any ideas what can be done. if its bad wires I can add jumper wire to the sensor but I don’t know where theyd go..or if its the pcm. I did a continuity test on the signal wire on sensor to pcm plug and theres no resistance. I replaced the sensor with a new one but not an oem one, idk if I got a bad one or what. I really don’t want to throw money at it and hope it goes away. I appreciate any and all help anyone can give me. thanks in advance! B)

    • Creator
      Topic
    Viewing 1 replies (of 1 total)
    • Author
      Replies
    • June 22, 2015 at 7:16 pm #667327
      Andrew PhillipsAndrew Phillips
      Participant

        Year/make/model/engine/trans/mileage?
        EDIT: found this from your other thread, if this thread is for same vehicle. [03 dodge ram 4.7]

        Check also that the sensor is receiving power and ground. Sometimes low battery voltage or a weak starter can trigger this code.

      • Author
        Replies
      Viewing 1 replies (of 1 total)
      • You must be logged in to reply to this topic.
      Loading…