- This topic has 1 reply, 2 voices, and was last updated 8 years, 5 months ago by
.
-
Topic
-
Alright, recently my power locks on my 1994 Oldsmobile 98 have been acting up. I dont have unlimited time in the world to try and fix this so just skipping and looking for opinions. The only door that will lock and un-lock is my driver side door. I can use the swich on the driver side and passenger side but the only door that will do anything is the driver side. The passenger wont move and neither will the back two doors. But the lock swich on the passenger door works to lock and unlock the passenger door.
I did check a few fuses but found nothing, haven t really had lot s of time to tinker with it lately so just looking for opinions.
Thanks!
-
Replies
-
quite commonly the motors for the door locks burn out on the GM cars and you have to unlock them manually after a car gets so old, could be wiring too, or lack of proper lubrication to mechanical components, check to make sure that everything is clean and not bound up by dirt and grime, and then check the wiring and the mechanical and if all else passes then its probably the servos for the door locks.
- You must be logged in to reply to this topic.