Menu

no start

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › no start

  • Creator
    Topic
  • January 17, 2013 at 6:21 am #492509
    khankhan
    Participant

      2000 subaru outback..crank no start… test no spark? any idea what it could be…replace coil pack assembly though that was what it was. still no start…

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • January 17, 2013 at 7:19 am #492526
      sam priemsam priem
      Participant

        check power to the coil pack, check plug wires, plugs.

        January 17, 2013 at 7:57 am #492538
        ytramytram
        Participant

          More info needed. Fuel pressure? Check engine light? Does this car have a tachometer? If it does, does it show rpm of any kind when cranking?

          January 17, 2013 at 11:56 pm #492643
          college mancollege man
          Moderator

            do you have a check engine light on? if so post codes

            January 23, 2013 at 11:52 pm #493996
            EricTheCarGuy 1EricTheCarGuy
            Keymaster

              You need to check and see if you have a primary signal getting to the coil negative. If you don’t have a signal there then the problem is on the primary ignition side which could mean a bad igniter or crank/cam sensor. This video is on a different vehicle but the principal is the same.

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…
            toto togel situs toto situs toto