Menu

New from Cincinnati

Home Forums Stay Dirty Lounge New Member Introduction New from Cincinnati

  • Creator
    Topic
  • #450189
    ShirokumaShirokuma
    Participant

      Hi Eric!

      Jeff from the lab here. 20 years in electronic sensors, a few years in automotive ICs for Sprague Semiconductor (now Allegro Microsystems).

      Let me know if you need some help with your electric series videos!

      Take care! Good luck with the new place!

    Viewing 6 replies - 1 through 6 (of 6 total)
    • Author
      Replies
    • #450191
      Shaun_300Shaun_300
      Participant

        Welcome to the forums Shirokuma!

        #450192
        dreamer2355dreamer2355
        Participant

          Welcome to the forums!

          #450193
          dreamer2355dreamer2355
          Participant

            What fuel pressure do you have going to the carb? I know they usually like around 6psi.

            And did you do any other checks to see if your running lean such as looking at the plugs?

            You may have to wait for an old school guy to step in as all my training is with EFI and im only know the extreme basics on carbs, sorry.

            #450194
            MattMatt
            Participant

              What do you mean by ‘runs lean out the exhaust’? I don’t see how exhaust smoke would show you a lean condition. If anything, having excessive black smoke out of the exhaust would suggest a rich condition, but I can’t think of any exhaust emissions leading you to a lean condition without a gas analyzer. If you provide more specifics on how the vehicle runs, we can probably give you more insight. Unless you mean it’s misfiring? Help us help you bud.

              #450190
              jbonejbone
              Participant

                thank you for your sharing of your knowledge shirokuma,never know i might need your help one day, welcome

                #450195
                EricTheCarGuy 1EricTheCarGuy
                Keymaster

                  Going through the carb is almost a maintence item so that may not be a bad idea. I hope to make some carb rebuild videos at some point when I get my hands on some. Don’t forget to check and fix any vacuum leaks.

                Viewing 6 replies - 1 through 6 (of 6 total)
                • You must be logged in to reply to this topic.
                Loading…
                toto togel situs toto situs toto