new brakes squeak

[Demetrius Stanley]

I have installed new brake pads, brake hardware,put some CRC brake quite on each pad cleaned the brake parts with brake kleen and a wire brush and cleaned the caliper bolts and put some new permatex brake caliper lube on the bolts and in the bushings I have also sanded th new brake down a litle to see if if makes a difference… What else can i do to make the squeak go away im tired of putting money into it and not getting any results… The squeak only happends when im stopping
The car is a 2010 Dodge Avenger SXT

Topic

[R.G.Young,Jr]

the squeak is usually caused by vibration of the pads during stopping. two things I would like to suggest, one check to see the trueness of the rotors, and second I would suggest that you clean the backing on the pads and lubricate or coat with hi temp antiseize (copper color).(do on both inner and outer pads), be sure to keep off of pad surface. pad surface needs to be completely clean.
keep posting about your progress, and good luck.

[dave]

put brake quiet on the back of the pads where they hit the caliper piston.

this is 99.9% effective.

[college man]

What brand and type of pads did you use?
Cheap pads give cheap results.

[celticbhoy]

Yeah was just gonna say if you bought jobber pads then that’s most likely the issue.

[Author]

Replies