- This topic has 13 replies, 12 voices, and was last updated 12 years, 10 months ago by
.
-
Topic
-
-
Replies
-
Need more info please…all the time even at a stand still engine running? Mabe drive belts..or when driving vehicle? Possible brake pad warning indicators.
Quoted From hastonandrew2:
my friends car screeches, even when she drives it please please please help me out
Step 1. Lift the radiator cap
step 2. Replace the car under it.Problem solved!
Seriously? Dude! You got to give more info than that or refer to my first two steps.
Using screeching or squealing when stopped has to do with loose belts. Get the accessory belts tightened!
Is it auto or standard(Could be a throwout bearing)
Belts!
Bad bearing or pump!
Cat stuck under car! (Speaking of anyone seen this http://www.msnbc.msn.com/id/21134540/vp/33393441#33393441+1 to the guy with the radiator cap and car idea!!!!
I had this problem once!!!
It was the damnest thing when I slammed on the breaks it stopped ….But now I got a windshield to replace!!!
It ended up being my wife telling me to slow down..
Try it bro!!!It may be your girlfriend , or could be her belts, could be this, could be that. Information is key,please provide us with it so we all don’t just keep guessing…ty
It’s probably the kniblin pins getting corroded. You may need to remove them and have them polished. It could also be that the loose nut behind the wheel needs to get tightened.
I KNOW ME PICK ME I KNOW ____________________flux capacitor________________________88mph here I come!!!!
There are tiny metal tangs sticking out from each of your brake calipers, scratching the rotors, causing the noise. Take a pair of dykes and clip those tangs off, then the noise is gone. Then move away before you neighbor learns to hate you.
@ hastonandrew2 Seriously, dude. Are you a troll? We don’t usually get those here….
I know this got marked as ‘solved’ but I didn’t see a solution posted. I would recommend checking the brakes as suggested but here are a couple of videos that might help if you haven’t found the source of the problem yet.
- You must be logged in to reply to this topic.