- This topic has 2 replies, 3 voices, and was last updated 10 years, 7 months ago by
.
-
Topic
-
My 1998 Chrysler/Se-bring/Convertible JXI/2.5-V-6 engine needs front and rear lower motor mounts. I’ve been shown them with the car on a lift. When looking to buy replacements I’m unable to find clear picture of each mount. It shows rubber bushings of each and then mentions rear engine mount assembly and front engine mount assembly. Do I need all four pieces or just the rubber bushings since the problem is extra vibrations idling from rubber being dry rotted.
Thanks in advance for your expertise.
-
Replies
-
Considering your car is 16 years old i would just replace it all thats just me might as well while your under there. But if your strapped for cash (like most of us)i would say just replace the bushings if possible good luck!
Personally, I do my best to make the engine run smooth before I replace engine mounts for an idle problem. As for your mounts I’m not really sure what parts you need. I would consult with your parts professional to see what’s available. More info on solving idle problems here.
http://www.ericthecarguy.com/faq/solving-automotive-idle-problems
Good luck and keep us posted.
- You must be logged in to reply to this topic.