Menu

Misfiring

  • Creator
    Topic
  • #867731
    Mike SmockMike Smock
    Participant

      So i own this 1997 Ford Ranger With the 4.0 liter engine. I have tried everything i can to fix a misfire on cyclinder 6. I have taken it to a shop and they couldn’t find it. they replaced the spark plug and wire and it calmed it down some. They spent close to 4 hours looking at it and still cant find out why. It appears to be arcing from the spark plug and boot of the wire.

    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • #867739
      Nightflyr *Richard Kirshy
      Participant

        If your seeing arcing..
        You have either a faulty spark plug or wire or both.
        Might try the water spray method on it in the dark to confirm.

        #867744
        JustinJustin
        Participant

          Possibly maybe they did not seat the wire correctly on the plug? If your seeing arcing there is probably your main issue.

          Sent from my iPhone using Tapatalk

          #867818
          Mike SmockMike Smock
          Participant

            If i still my hand near the engine while running it shocks me some and you can see it arcing to my finger.

            #867832
            wafrederickwafrederick
            Participant

              Do a compression check on that cylinder,it maybe piston or valve related called a dead cylinder.If you know anyone that has a good used coil,try this too and maybe a bad coil as well.The good used coil is a test piece basically before you buy a new one

            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…
            toto togel situs toto situs toto