- This topic has 1 reply, 2 voices, and was last updated 7 years, 12 months ago by
.
-
Topic
-
Hello ETCGers,
I was forced to replace one of my mirror assemblies for a 2001 Prelude from one off the salvage yard (which is from an older model, but the color matches almost perfectly and no one notices :p), since mine was destroyed while the car was parked on the street (probably by a cyclist, or someone who hates me lol, since it was a curb side), but the used mirror assembly is not perfect. Even though I tried to replace the mirror lens with my original lens, the lens still vibrates slightly while driving. Is there a quick fix for this with some heavy viscosity grease that goes on the ball thing that holds the lens for a Honda mirror or something similar, or it’s a lost cause? I don’t think Honda makes these assemblies.
Thank you.
-
Replies
-
sounds like your assably is bad… you might have a gear missing or has the teeth bad… you can try ahesive but your not going to move it afterwards… also make sure all your screws and in and you have no cracks… other then exchanging it for another one at the junkyard thats about it… if you use any really tarish grease it will burn the motor up or just seaze up when it get cold or will ware the grease out over time sorry to say I would check online or autopart stores they uselly can order them fopr you
- You must be logged in to reply to this topic.