Menu

Loose front wheel

  • Creator
    Topic
  • #618357
    Torbjörn HedmanTorbjörn Hedman
    Participant

      Hi

      First of all i just have to say that i’m a NOOB here and in the garage.
      I have a Chrysler Voyager 2.4 2000.
      My prolem started 2 – 3 days ago (after been driving on a gravel road for about 2 months.
      When jacked up the left front wheel is loose/ wobbles and firm when on a flat surface.

      What can it be?

    Viewing 6 replies - 16 through 21 (of 21 total)
    • Author
      Replies
    • #618812
      Torbjörn HedmanTorbjörn Hedman
      Participant

        Maybe in the US, i don’t think swedish mechanics will do it for free. 🙁

        #618824
        Dave OlsonDave
        Participant

          Two weeks ago the tie rods were almost with all certainty bad. How could they have aligned it?
          I would take it back and demand the alignment be redone free.

          #618939
          Mike scubacat3Mike
          Participant

            Exactly! Unless you hit a curb or a pothole since then, they could not possibly have done a proper alignment with loose tie rods. Demand they do it again, and properly this time! Then, find a more honest shop for next time.

            #618947
            Torbjörn HedmanTorbjörn Hedman
            Participant

              As i wrote before, the road i have to drive everyday is full of potholes (due to road work) and i have driven down in (without lying) 100 big potholes during the summer. 🙁

              I’m pretty sure they won’t do i for free. Grumpy mechanics that work there. Felt like they didn’t want to work.

              #621742
              Torbjörn HedmanTorbjörn Hedman
              Participant

                After waiting 11 days i finally got the tie rod (outer and inner). So this weekend there will be some crawling under the car. 😀
                But now time for some sleep to get ready for work tonight.

                Will continiue to post progress.

                #622150
                Torbjörn HedmanTorbjörn Hedman
                Participant

                  After cheking and checking again the inner tie rod was still good only the outer tie rod was bad. So the outer was changed without any difficulties. Hopefully it will hold a while now. 😀

                  Now time for some electric trouble shooting.

                Viewing 6 replies - 16 through 21 (of 21 total)
                • You must be logged in to reply to this topic.
                Loading…
                toto togel situs toto situs toto