Menu

Lean engine misfire

  • This topic has 4 replies, 4 voices, and was last updated 11 years ago by TomTom.
  • Creator
    Topic
  • #554418
    JimJim
    Participant

      Hey guys, have been trying to smog my 1984 Chevy pickup and it keeps failing. The smog tech said there is a lean engine misfire. What can cause a lean engine misfire? Thanks, Jim.

    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • #554472
      college mancollege man
      Moderator

        see if you have any trouble codes.Low fuel pressure,Ignition components,o2 sensor
        MAF problem. There are alot of possibilities.

        http://www.obd-codes.com/faq/read-gm-2-digit-obd-codes-free.php

        http://www.ericthecarguy.com/faq/solving-automotive-performance-issues

        #556139
        EricTheCarGuy 1EricTheCarGuy
        Keymaster

          A lot of things can cause that code. The article posted above should get you started on some things to try. Keep us posted on what you find.

          #556594
          JimJim
          Participant

            Thanks guys, will check for any trouble codes.

            #556603
            TomTom
            Participant

              [quote=”mooxen33″ post=77785]Hey guys, have been trying to smog my 1984 Chevy pickup[/quote]

              He did say 1984 . . . . unless that was a mistake, or this is a swap job, I would be surprised to find a computer / trouble code in it. I don’t think EFI in Chevy vehicles really became wide spread until later in the 80’s. I believe TBI started in ’86.

              On a carb’d engine, clogged fuel filter, weak pump, kinked fuel line, dirty carb, bad float, or float adjustment, improper idle mixture adjustment, or wrong jetting in the card can all cause lean conditions.

            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…