Integra Kickdown cabe/transmission throttle cable

[Dylan Shrout]

Hello, I have been having a little bit of difficulty replacing my kickdown cable on my 1995 Acura Integra. I got it out after a difficult time getting the pin of the other end out of the transmission rotator. I do not know what that rotator part is called. The rotation is resisted by a spring. Anyways, I ended up getting the rotator stuck and tugging a bit on the cable. Now I am unable to rotate it back to it’s original position. If anybody has any suggestions, I would really appreciate it 🙂

Attachments:

• IMG_0842.png

Topic

[college man]

I don’t see anything stuck? no cable and the kick down lever won’t move now?

[Dylan Shrout]

I took the old cable off, but I had to tug on it to see where the pin on the cable was connected. That rotator is suppose to be turned 180 degrees compared to the picture. I can rotate it up and down, but it’s as if something mechanical on the inside is keeping it from rotating 180 degrees where it suppose to be.

[Mike]

[Dylan Shrout]

Here is another way of looking at it

The position it is in, in the picture, is as far as it should turn going clockwise, on mine, that as how far it goes counterclockwise.

Attachments:

• image.jpg

[Author]

Replies