Impact wrench

This topic has 8 replies, 8 voices, and was last updated 11 years, 4 months ago by Court Rutherford.

Creator
Topic
May 18, 2013 at 6:38 pm #523064
Alex F.
Participant
Whats a good impact wrench that is under $50 and will run on a
-125 psi
-120 volt
-ASME code tank
Air Charger Pro?
Creator
Topic

Viewing 8 replies - 1 through 8 (of 8 total)

Author
Replies
August 10, 2013 at 5:03 pm #542682
college man
Moderator
I don,t know what you could get for 50.00 dollars.
try sears.
August 10, 2013 at 6:49 pm #542692
dreamer2355
Participant
Also look for used impacts on eBay or Craigslist 🙂
August 10, 2013 at 6:54 pm #542693
jeep72
Participant
try harbor freight tools
August 18, 2013 at 12:09 am #543896
W00DBar0n
Participant
For 50$ there isn’t much in the “good” area. There are a few that’ll work but wont have the quality of the $150+ range impacts.
Best look for a used impact, might find a jem in a pawn shop or craigslist.
August 18, 2013 at 2:09 am #543906
dave
Participant
Attachments:
- 2190Ti_DTi_l.jpg
August 18, 2013 at 2:09 am #543908
dave
Participant
banana:
October 9, 2013 at 10:38 pm #554068
Andrew
Participant
find a used IR231C at a pawn shop. they’d be about that. They go for 120 new
October 21, 2013 at 5:57 am #556354
Court Rutherford
Participant
Yes, IR231C is a rock solid guy. We’ve used it on 7/8″ GR8 bolts to suspend a 3000# part in a robot welding cell. Not broken any hammers after 3 years.
You will however not find any good gun for $50.
Author
Replies

Viewing 8 replies - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.

Loading…