HVAC/Vent doors

[Matt]

Your best bet is to get a factory service manual, or you could go to alldata.com and click on the DIY button in the top right corner, and subscribe.

Topic

[Andy White]

I Was thinking of just Scraping out the old air seals and just glue new ones in place making sure they seal it back up like it should

[Matt]

The problem is there is only one airbox that contains your mode and blend door.

[Andy White]

(I Meant Scraping Sorry) Scrap The Old

[moparfan]

im not sure if you could get to all the blend doors that way but if you do great. just an idea is use some of that weather striping for a house that is foam with a sticky back. that mite work for a while unless some one knows of something better.

[EricTheCarGuy]

You would have to evacuate the AC, drain the coolant, and remove the dash and HVAC assembly to address that issue unfortunately, I don’t think you’d be able to do it without going through that process because you access those doors you would need to open

[Andy White]

What About Puling the Steering Column Out and Tilting the top of the dash Down would i be able to get access the doors from the top of the dash?

[Matt]

That actually sounds like more work to me then going straight after the airbox…

[Andy White]

Even If its More Work

[moparfan]

[quote]Quoted From Skippy55008: _x000D_
_x000D_
Even If its More Work

[Matt]

[quote]Quoted From moparfan: _x000D_
_x000D_
i wouldn’t worry about the heater core as much as the A/C. you could simply just unhook both hose’s to the heater core and blow some compressed air threw to clean it all out. then all the mess stays out side the ca

[Andy White]

[quote]Quoted From moparfan: _x000D_
_x000D_
i wouldn’t worry about the heater core as much as the A/C. you could simply just unhook both hose’s to the heater core and blow some compressed air threw to clean it all out. then all the mess stays out side the ca

[Andy White]

Okay

[moparfan]

[quote]Quoted From Skippy55008: _x000D_
_x000D_
Okay

[Andy White]

[quote]Quoted From moparfan: _x000D_
_x000D_
now that i seen the dash i should of known this one lol i just went threw a 96 about 3 days ago. lol i guess i was thinking it was a older truck. anyways there is one more door right behind the the blower motor. so

[EricTheCarGuy]

Well done on doing the job with the HVAC still in the truck, I was not aware you’d be able to disassemble it to a point where you could get to that stuff.

[Author]

Replies