- This topic has 1 reply, 2 voices, and was last updated 9 years, 4 months ago by
.
-
Topic
-
I HAVE AN INTERESTING ONE FOR ANYONE WHO CAN SUGGEST A SOLUTION, I HAVE AN ACCORD 99 4DR
THE ORIGINAL ISSUE WAS THE OUTER DOOR HANDLE , THE ROD THAT CONNECTS WAS POPPING OUT OF THE HANDLE SO COULD NOT OPEN DOOR FROM OUTSIDE, SIMPLE FIX, OPEN DOOR FROM INSIDE POP OFF DOOR PANEL PUSH ROD PIN BACK IN HANDLE OPENING… WELL NOW THERES A NEW PROBLEM.. THE ROD POPPED OFF AGAIN, WENT THRU PUSHED BACK IN.. NO BIGGIE NOW THE DOOR COMPLETE DOES NOT OPEN FROM OUTSIDE HANDLE OR INSIDE HANDLE AND HERES THE GOOFY PART, WHEN U PULL THE HANDLES (EITHER OUTSIDE OR IN) THE LOCKS ENGAGE?????
OK.. SO, IM LOOKING FOR A SOLUTION TO GET THE DOOR TO OPEN FROM INSIDE..
SOORY FOR CAPS ITS EASIER FOR ME TO JUST TYPE IN CAPS .. HAVE TO FOR WORK ALL DAY SO ITS A HABIT NOW
-
Replies
-
I have the same generation accord. Try removing the handle from the inside and pulling on the rods with a pair of pliers to get the door open. If that works, then take off the panel and see if you can figure out where the problem is. Those rods can be a real you-know-what, but perhaps a diagram could help you out. I did a similar procedure on my friend’s 97 maxima and I found some diagram somewhere that helped me get everything back together again.
The handle will come off if you pry back the little cover with a small flathead and remove the screw. Then. slide it (Can’t remember if it’s toward the front or the back) and it will unclip. It takes a little bit of force, but it will come off. The rods have a little plastic clip that turns to lock it, but it sounds like it’s not even connected so it should just come out. If the rods keep coming off then make sure that you put them into the holes and use the little clip things to hold them in place. They just spin around. Put the rod in and turn the clip so that it secures it into place
- You must be logged in to reply to this topic.