Menu

Honda(2004) civic 1.7 O2 sensor(secondary) error

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here Honda(2004) civic 1.7 O2 sensor(secondary) error

  • This topic has 5 replies, 5 voices, and was last updated 11 years ago by dandan.
  • Creator
    Topic
  • #555613
    dandan
    Participant

      Hi I’m using a Honda civic (2004) 1.7l vtec car.,I have a faulty O2 sensor ( secondary )(Code P0141)

      So I ordered one from Ebay.(pic is also attached )

      http://www.ebay.com/itm/251343500234?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

      now my mechanic says that itz not the right sensor (he said wire is too short also the wrong socket)
      but ebay seller says it can be used with my car.

      what if i cut the socket and use the old socket?
      will it work that way? :unsure:
      pls help

      Thanks
      Kp.

      Attachments:
    Viewing 5 replies - 1 through 5 (of 5 total)
    • Author
      Replies
    • #555628
      college mancollege man
      Moderator

        It should work as long as you get the wires correct.
        But now you are cutting and splicing. solder and heat
        shrink them.

        #555645
        Kevin CriswellKevin Criswell
        Participant

          Looks like the O2 you got was for the upstream and that is why the cable is too short.

          I would do the repair like College suggested, don’t use butt-connectors it will cause you problems in the future.

          #555650
          george gonzalezgeorge gonzalez
          Participant

            You can splice the wires, but most folks don’t have the skills to splice them properly, and then protect them from the weather.

            #555693
            PaulPaul
            Participant

              Before you splice the connections, does your car have a wideband air-fuel/primary sensor? If so, it may not work properly as a secondary oxygen sensor – the computer may throw an error when it doesn’t see the appropriate voltage signal from the sensor. The LEV and ULEV Honda models are picky with O2 sensors.

              #556059
              dandan
              Participant

                HI Guys,
                I fixed my o2 sensor that i bought from ebay.itz working fine 🙂 ,My mechanic did a scan and didn’t find any errors after that.If i’m not mistaken O2(primary) voltage was always around 1.28v then it vary between ~ 1.28v – ~ .9v ,but my o2(secondary ) the one I replaced gave a reading between ~.79v – to .45v.. Is that Normal?

                Also I’ve found my spark plugs are getting bad very often, My mechanic said it could be because of my faulty O2 (secondary ) sensor.Is it true ?

                Thanks
                KP

              Viewing 5 replies - 1 through 5 (of 5 total)
              • You must be logged in to reply to this topic.
              Loading…
              toto togel situs toto situs toto