Menu

Honda Odyssey wheel hub problem.

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › Honda Odyssey wheel hub problem.

  • Creator
    Topic
  • May 25, 2015 at 4:53 am #664712
    Randy athensRandy athens
    Participant

      Wheel bearings going out on 2003 Odessey. Bought new rear wheel hubs, but when I installed and attempted to torch the nut to spec. (181lbs) the hub will not spin, tried another hub and same problem. What am I going wrong? Anything more than mild tightening of the nut seems to freeze the hub against the back wall around spindle.

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • May 25, 2015 at 3:02 pm #664752
      college mancollege man
      Moderator

        See if this helps.

        May 25, 2015 at 6:40 pm #664758
        IngvarIngvar
        Participant

          Why should hub spin? Or the ROTOR does not turn after install?

          May 25, 2015 at 7:07 pm #664761
          Randy athensRandy athens
          Participant

            The wheel attaches to the hub, the hub spins on the bearings

            May 25, 2015 at 11:49 pm #664779
            Bennett FleisherBennett Fleisher
            Participant

              Did you compare the new hubs to the old one? Maybe they are the wrong model year hubs or they were manufactured wrong as they should float on the bearing and not touch behind on the drum back.

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…
            toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
            situs toto situs toto