honda knock sensor

[Micheal]

I have a 92 Honda prelude si with a h23a1 motor and I’m going to change the knock sensor but I can not find what to torque it to. and what I’ve read it is important for it to be torque right sorry for bugging you sure you get a lot of these would really be helpful if you could let me know ty mike
:stick:

Topic

[Daniel]

I think around 25 ft lbs. As long as you don’t over torque you should be fine, but I will look it up and let you know monday when I get to the shop if you still need to know

[Daniel]

My buddy says he did one yesterday and it’s 23 ft lbs

[Micheal]

great thank you very much i can just about always find it online but that one no ones seems to know, most people just tighten it down to whatever

[dreamer2355]

You can actually cause performance issues if you tighten down the KS too tight as the KS is very sensitive.

[Author]

Replies