Menu

Honda Accord trans flush- 93 Accord

Home Forums Stay Dirty Lounge Service and Repair Questions Answered Here Honda Accord trans flush- 93 Accord

  • Creator
    Topic
  • #576887
    JimJim
    Participant

      Hey guys, in regards to a Transmission flush done by machine, i read that it can damage the transmission, so one should do the flush manually by draining the transmission, fill back up, drive around, drain, fill back up, etc. Any thought as to what is the best way to flush, or just drain and fill up one time and then change fluid again at next recommended interval, thanks in advance, Jim

    Viewing 3 replies - 1 through 3 (of 3 total)
    • Author
      Replies
    • #576902
      college mancollege man
      Moderator

        A drain and refill is good. If you wanted you could do the drive
        and drain. no machine.

        http://www.ericthecarguy.com/faq/solving-transmission-problems?start=6#ServicingAutomaticTransmissions

        #577033
        BillBill
        Participant

          I have done dozens of transmission flushes with a machine and have never had a problem. To be sure you can drain and fill a couple of times if you wish.

          That said, there are 2 different types of machines. A fluid exchange and a machine that pumps out the old fluid as the new fluid is injected. The exchange machine is best in my opinion.

          #577166
          EricTheCarGuy 1EricTheCarGuy
          Keymaster

            It’s not likely the shop you would take it to would have Honda fluid in their transmission flush machine. I strongly recommend against using anything but Honda transmission fluid in a Honda transmission. That said, a flush is not required unless there is an issue. I do not recommend ‘flushing’ as a maintenance procedure. The only thing that’s necessary is to do a drain and refill about every 30K and you should be fine. More info here.

            http://www.ericthecarguy.com/faq/solving-transmission-problems

          Viewing 3 replies - 1 through 3 (of 3 total)
          • You must be logged in to reply to this topic.
          Loading…