Menu

Grey Pneumatic 8163MRD Tool Review

Home Forums Stay Dirty Lounge The EricTheCarGuy Video Forum Grey Pneumatic 8163MRD Tool Review

  • Creator
    Topic
  • #591415
    EricTheCarGuy 1EricTheCarGuy
    Keymaster

      I really like this socket set if you couldn’t tell. I’ve used just about every major professional tool brand there is and I think these sockets are as good if not better than all of them. What are your thoughts?

    Viewing 15 replies - 1 through 15 (of 15 total)
    • Author
      Replies
    • #591476
      Mike MillerMike Miller
      Participant

        Your review sold me on trying a set I had to order them in so I will post what I think about them in a couple days .
        Thanks for the review I’ve heard of G/P but haven’t given much thought about putting them in my box until now.

        #591480
        EricTheCarGuy 1EricTheCarGuy
        Keymaster

          [quote=”mrre78″ post=93158]Your review sold me on trying a set I had to order them in so I will post what I think about them in a couple days .
          Thanks for the review I’ve heard of G/P but haven’t given much thought about putting them in my box until now.[/quote]

          They really are nice tools. You won’t be disappointed.

          #591644
          VinceVince
          Participant

            Nice review.Thanks for the info and the insight :cheer:

            #591976
            vgs8606vgs8606
            Participant

              Can you compare it with any low profile 3/8 ratchet? I would like to know if this ratchet is thinner than competing ratchet.

              #592008
              Lee AnnLee Ann
              Moderator

                I needed a 1/4″ set today but ended up with a cheap set to get me by for today’s project. Oh well.

                #592010
                Lorrin BarthLorrin Barth
                Participant

                  Just curious, do you know of someone who got hurt using a chrome socket on an air wrench. I mean, if I am under a car and what I can reach is a chrome socket, at least up till now, I’d be disinclined to crawl out for a black one.

                  #592030
                  EricTheCarGuy 1EricTheCarGuy
                  Keymaster

                    [quote=”vgs8606″ post=93409]Can you compare it with any low profile 3/8 ratchet? I would like to know if this ratchet is thinner than competing ratchet.[/quote]

                    Perhaps on the next one. Since this one is already done and edited it would be difficult to go back and do the review again. But from what I remember it wasn’t any thicker than the other ratchets I have.

                    Thanks for your input.

                    #592032
                    EricTheCarGuy 1EricTheCarGuy
                    Keymaster

                      [quote=”barneyb” post=93436]Just curious, do you know of someone who got hurt using a chrome socket on an air wrench. I mean, if I am under a car and what I can reach is a chrome socket, at least up till now, I’d be disinclined to crawl out for a black one.[/quote]

                      I don’t know anyone personally, but there have been several comments on my videos in the past on this topic. So to avoid those comments, I thought I would address the issue in the video.

                      #593553
                      David BuehnDavid Buehn
                      Participant

                        Base on Eric recommendations I just order the 81635MRD tool set.
                        Has anyone else purchase this set?

                        Eric I support your efforts.
                        Your tips and videos have help me tremendously.
                        Far as I am concern best ten bucks I spent.

                        Hope to one day make your open house.

                        Dave

                        #596379
                        VinceVince
                        Participant

                          Ditto that man!

                          #600780
                          daviddavid
                          Participant

                            Woohoo! Made in TAIWAN! (non-communist China)

                            #602570
                            John WilkinsJohn Wilkins
                            Participant
                              #602642
                              EricTheCarGuy 1EricTheCarGuy
                              Keymaster

                                [quote=”byrysh” post=98424]I bought the 1/4 inch set to see for myself. My video review of 1/4 set is here,

                                http://www.jbtoolsales.com/grey-pneumatic-89653crd-1-4-dr-53pc-fract-metric-duo-socket-set-6-point/

                                So happy I bought the full set of 3/8.

                                http://www.tooltopia.com/grey-pneumatic-81659crd.aspx?utm_source=google&utm_medium=paid_search&utm_campaign=paid_search_google_pla&scid=scplp6813128&gclid=CJPluru_ur4CFQGTfgodJEgAZA
                                Ill do a review on it too, Thx again Eric ;)[/quote]

                                NIce! I hope to get a 1/4 set for myself in the not too distant future. I really love my 3/8. Thanks for posting the review.

                                #602722
                                John WilkinsJohn Wilkins
                                Participant

                                  Hope you get a kick back for all the sales youre gettin from your review.. :woohoo:

                                  #619748
                                  GordGord
                                  Participant

                                    So, what’s the overall recommendation? Is this set worth getting or not?
                                    I’m looking for a decent 3/8 drive set, I have some 3/8 drive stuff now but would really like a good set… should I get this set or is there something else I should look at.

                                    I really don’t want to spend a fortune for a set, I know Snap-on and maybe some others are better?? But I’m not a professional so I wouldn’t be using it every day or making a living using it.

                                    Thanks in advance.

                                  Viewing 15 replies - 1 through 15 (of 15 total)
                                  • You must be logged in to reply to this topic.
                                  Loading…