forgot to put one washer

[Gedalya]

HI, I replaced my rear caliper. When I removed the bonjo bolt, I saw one washer fall off. So when I replaced it with a new bonjo bolt, I only put one washer between the cylinder and the brake hose, I forgot to put one between the bolt and the brake line. It doesn’t seem to be leaking. Should I remove it and insert the second washer, or just leave it?
Thank you.

Topic

[Richard Kirshy]

You need 2 of the sealing washers on the banjo bolt for proper sealing of the hydraulic fitting.

[James]

That might cause an alignment issue knowing it is on the brake. I think it will be better if that washer would be installed as well.

[Author]

Replies