Menu

Flywheel Resurface help

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › Flywheel Resurface help

  • Creator
    Topic
  • January 5, 2013 at 7:42 pm #488756
    dredre
    Participant

      Anyone know if its still good to resurface the flywheel if it has burnt spots.

      [IMG]http://i592.photobucket.com/albums/tt5/iaWndRe/IMG_0480_zpsa6409763.jpg[/IMG]
      [IMG]http://i592.photobucket.com/albums/tt5/iaWndRe/IMG_0488_zpsa6816932.jpg[/IMG]

    • Creator
      Topic
    Viewing 4 replies - 1 through 4 (of 4 total)
    • Author
      Replies
    • January 5, 2013 at 8:20 pm #488778
      college mancollege man
      Moderator

        A good machine shop is the best answer.They can tell you
        if its worth machining.

        January 5, 2013 at 9:07 pm #488780
        Roy FrenchRoy French
        Participant

          As long as you don’t have little cracks, it can be cleaned right up. If you have heat cracking the sharp edges will prematurely wear the clutch lining.

          January 5, 2013 at 9:21 pm #488784
          dredre
          Participant

            thanks for the reply,
            No cracks that i know of. Just small warpage and marks.
            Will go to the machineshop and see if i got any luck on this flywheel

            January 11, 2013 at 11:38 pm #490777
            EricTheCarGuy 1EricTheCarGuy
            Keymaster

              I actually worked at a place where we machined fly wheels and I’ve machined plenty myself. I can say for a fact that what you have would clean up just fine.

            • Author
              Replies
            Viewing 4 replies - 1 through 4 (of 4 total)
            • You must be logged in to reply to this topic.
            Loading…
            toto togel situs toto situs toto