Menu

Engine Swap Questions

  • Creator
    Topic
  • #461395
    DodgeyDodgey
    Participant

      Its not the same engine, but theres no difference.

    Viewing 10 replies - 1 through 10 (of 10 total)
    • Author
      Replies
    • #461396
      Matt BrandsemaMatt Brandsema
      Participant

        I would recommend getting yourself a service manual.

        #461397
        KZ 259KZ 259
        Participant

          eric has two videos of swapping out motors. review those videos

          #461398
          college mancollege man
          Moderator

            heres some videos that should give you some direction._x000D_
            you already have the 6.1 Hemi. what are you going to stuff_x000D_
            in there? For me the sensors can be reused. anything mechanical_x000D_
            replace. (water pump, thermostat) how many miles on the 2010 motor?_x000D_
            _x000D_
            htt

            #461399
            DodgeyDodgey
            Participant

              [quote]Quoted From college man: _x000D_
              _x000D_
              heres some videos that should give you some direction._x000D_
              you already have the 6.1 Hemi. what are you going to stuff_x000D_
              in there? For me the sensors can be reused. anything mechanical_x000D_
              replace. (water pump, thermosta

              #461400
              college mancollege man
              Moderator

                [quote]Quoted From Dodgey: _x000D_
                _x000D_
                The old engine has 42,000 miles on it. The new one I will be getting has 34,000 miles on it. I don’t get the new engine for another 3 weeks and there’s nothing that I need to stuff, the engine is coming out of a Chry

                #461401
                619DioFan619DioFan
                Participant

                  I would reuse the alt and the starter. also I would pull the motor and tranny as a unit. the upper tranny to block bolts can be a real pain to get to when still in the car. pulling as a unit means just unbolting the trans mount , drop the drive shaft and

                  #461402
                  DodgeyDodgey
                  Participant

                    [quote]Quoted From 619DioFan: _x000D_
                    _x000D_
                    I would reuse the alt and the starter. also I would pull the motor and tranny as a unit. the upper tranny to block bolts can be a real pain to get to when still in the car. pulling as a unit means just unbolting th

                    #461403
                    Logan JohnsonLJ11194
                    Participant

                      What happened to this engine that you’re replacing the entire thing at 42,000 miles?

                      #461404
                      DodgeyDodgey
                      Participant

                        Quoted From LJ11194: _x000D_
                        _x000D_
                        What happened to this engine that you’re replacing the entire thing at 42,000 miles?

                        _x000D_
                        _x000D_
                        Well it died, read my topic that’s called ‘Huge Leak and Engine Misfire? HELP!!’

                        #461405
                        EricTheCarGuy 1EricTheCarGuy
                        Keymaster

                          [quote]Quoted From college man: _x000D_
                          _x000D_
                          heres some videos that should give you some direction._x000D_
                          you already have the 6.1 Hemi. what are you going to stuff_x000D_
                          in there? For me the sensors can be reused. anything mechanical_x000D_
                          replace. (water pump, thermosta

                        Viewing 10 replies - 1 through 10 (of 10 total)
                        • You must be logged in to reply to this topic.
                        Loading…
                        toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
                        situs toto situs toto