- This topic has 4 replies, 4 voices, and was last updated 11 years, 9 months ago by
.
-
Topic
-
been back and forth three times to get my car inspected and has failed cause the emission sensors werent ready. we replace the termostat though the car is running better the rediness codes are still not ready. driven the car every day on the highway and on back roads idk what could be the problem idk if its the ecu the rest of the car runs great so i dont think the ecu went bad….any thoughts im at a bit of a loss here
-
Replies
-
what is the year make and model of your vehicle. you might need to drive it some more. when you repair a car, you need to give it sometime before you do an emission test. possibly a 2 to 3 weeks of normal driving in advanced.
check this link out for more info. look at Part. B check engine light Part.3
year ,make, model, engine size, and any repair work that has been compleated, then we will be able to talk you through the diagnostic procedures, you will need to get the evidence, you need to find the problem, to repair this vehicle, so it can pass emissions testing. please keep in mine everything on a vehicle can be tested one way or another, and through this testing we can determine what your problem is, and what you will need to do to correct it.
P.S. could you give us the exact wording that the test station used to fail the vehicle. also any codes stored or check engine lights on.from what I read. The dealer has to reflash the computer
http://www.justanswer.com/dodge/0xd6g-having-emissions-problem-96-chrysler.html
- You must be logged in to reply to this topic.