- This topic has 0 replies, 1 voice, and was last updated 10 years, 1 month ago by
.
-
Topic
-
Hey all,
My oil pressure sending unit it leaking. I have a replacement part, but access is the issue… It’s at the back of the block and there is no way to get at it from the bottom (the trans blocks access to it). I can wiggle the sensor socket and ratchet into position, but I cannot undo that stupid Chrysler connector (that looks like this):
Location on the block:
I can’t get the red connector at the top to release (it doesn’t help that it is turned away from me. I’ve tried cleaning with brakeclean (before attempting to get it loose), long hose clamp pliers, even longer needle nose, regular needle nose, and little tiny needle nose pliers. I can’t really get anything else in there and onto the connector…
Any thoughts on how I can get this connector off to change this part? Thank you!
- You must be logged in to reply to this topic.