cv joint

[jaywen torres]

I have 2005 acura mdx. I just replaced the outer-inner tie rod, sway bar links and struts. Now I damaged the cv boot during the installation of the struts (leaking grease)and I noticed clonking noise on a bump and when turning. Is this a sign that I have to change the axle?

Topic

[Ingvar]

No, as it’s sign of bad sway bar bushings.
Of course, now that you busted the boot… Ha-ha, simply wrap it into a plastic bag and snug in place with black tape. I drove on some like that for about 3 years before axle replacement.
Hey, what is inner-outer tie rod? I know inner, and know what is called outer. But both?

[Bill]

You can replace the torn boot or just replace the axle. It’s not likely that the joint is making noise as it takes a while to wear out the joint from lack of grease.

I would go over your work and make sure everything is tight.

[jaywen torres]

yes I replaced them both side…thanks for the answer I will check my sway bay bushing tomorrow

[Author]

Replies