curtesy lower light ok domes not working 2007 jeep grand cherokee larado

[dave1645]

second attempt for help :

my 2007 grand cherokee upper dome lights and cargo light are not turning on , the lower curtesy light are working when opening any door or liftgate they fade to off as they are suppose to when door are closed ant help would be helpful

From the replies I got , I don’t think everyone read the problem correctly
The lower courtesy light do work properly all door s turn on the lower light ,but not the upper domes and cargo light , yeas even the liftgate turns the lowers on
I would like to know where the uppers get their power they work fine manually
anyone with ideas please respond

Topic

[Mike]

Is there a switch incorporated into your dome light? It might be in the OFF position.

Also, some vehicles can turn on their dome lights by moving the dashboard light brightness control to MAX, (or there could be a separate detent position just past the MAX position). If your Jeep is wired like this, does the dome light illuminate when you max out the dashboard brightness?

[dave1645]

there is NO off switch on the dome lights and as stated the lower light are working and am able to turn them on with the control on the headlight stick

[dave1645]

The dome lights are fixed. For those interested. There is a wire harness that runs down the drivers side ,under the rug. In a plastic housing. Open the plastic via tabs on the side. You will find a orange /yellow wire. ,and most likely a bubble of green crusty. Pull on it and it will break. Just strip both ends. Add a piece of wire and splice solder and and tape up. And Walla. Your light will all work. Easy fix.

[dave1645]

[quote=”dave1645″ post=196981]The dome lights are fixed. For those interested. There is a wire harness that runs down the drivers side ,under the rug. In a plastic housing. Open the plastic via tabs on the side. You will find a orange /yellow wire. ,and most likely a bubble of green crusty. Pull on it and it will break. Just strip both ends. Add a piece of wire and splice solder and and tape up. And Walla. Your light will all work. Easy fix.[/quote]

[Author]

Replies