crv mk 2 differential bushings change

[simon a rawle]

just a quick one i have differential bushings to change on my crv mk 2 uk car wen im off work next week . looking at the genuine Honda bushings photo below . there look like there will press in easy with them just being runner (no steel outer ) so has any one done this by just undoing the cv joints from the hubs and undoing differential mounts and lowering the differential down on to a jack or wooden blocks under the car and pressing the bushing out and putting the new ones in h under the car see hab 022 on the diagram . or shall i just take the differential off and put it on the bench to do this ? i have a c clamp press it but thing i may be able to push this bushing in by hand thanks in advance

Attachments:

• cvrbusging.jpg
• crvbrshmout.jpg

Topic