- This topic has 4 replies, 2 voices, and was last updated 11 years, 9 months ago by
.
-
Topic
-
Hello on my 2008 Lexus IS2050 I don’t have a check engine light on, I just want to see how my car is doing with a OBD2 scanner and I want under OTC on the scanner and it said that I have P0335 Crankshaft Position Sensor A Circuit and P0300 Random Misfire Detected and B1650 SRS Occupant classification system malfunction. What should I do???
-
Replies
-
I don’t think you can really do anything about the SRS code as that is normally a proprietary system. Aside from that it’s just a detection error. This could be due to setting a brief case on the passenger seat or something like that. In short if you don’t have an SRS light on I wouldn’t worry about it.
As for the other codes, same drill. if the CEL is not lit now then it’s part of the history that could have happened some time ago. It could just be a glitch. These things happen all the time especially with crank sensor and misfire codes. I’d advise you clear those codes and then see if they come back. I’d bet you wont’ see them again.
Keep us posted.
Yesterday I wanted to see if I can erase the codes and when I want to see if the code are present, they were not there, so I had no codes come up and I don’t know where they want, so I am happy to see that I have no codes come up:) thanks banana:
- You must be logged in to reply to this topic.