Menu

clutch engaigment

  • Creator
    Topic
  • #530854
    garygary
    Participant

      i got a 92 geo storm from my friend not all too long ago the only problem is there is something out of wack in the clutch. the car wont move after realising the clutch and its not me just failing at it. i pulled the transmission to look at the clutch and it appeared it was over tight. the fingers were depresed. so i re torqed them to the right setting at 13 foot pounds. i also looked at the friction plate it wasnt all to preaty but i have seen worse that work. checked the trans. the guy i got it from put this trans in and it was out of a gsi but the bellhousing matched up and the trans felt fine any sugjestions

    Viewing 7 replies - 1 through 7 (of 7 total)
    • Author
      Replies
    • #530928
      MathieuMathieu
      Participant

        [video]http://www.youtube.com/watch?v=h7JJ_g2UuBI[/video]

        Check for leak on the master and slave cylinder. (brake pump)
        [video]http://www.youtube.com/watch?v=RybH9Apni38[/video]

        [video]http://www.youtube.com/watch?v=I4CUBB01qX8[/video]

        #530954
        college mancollege man
        Moderator

          Is it cable or hydraulic operated?

          #530983
          garygary
          Participant

            its cable operated. however this is not the isue the pedal feels fine plus the clutch fork is to hard to push so i know the pressure plate is still good and i am sure the friction plate is still good. i think it is something in the transmission. but i am not completey sure if it is or not. i have it in first gear and both axles still both move. but the clutch pack all looks good.

            #530999
            MathieuMathieu
            Participant

              See if help to solve our problem whit the internal transmission knowledge.
              [video]http://www.youtube.com/watch?v=vOo3TLgL0kM[/video]

              Synchro ring could really be your issue. But, try transmission conditioner before changing this gears or the transmission itself.
              [video]http://www.youtube.com/watch?v=MXsRfbOiBhE[/video]

              Also, did you see a magnet in the oil pan to catch the metal from the transmission. Check if you need to replace a transmission filter or not. Maybe you have something in the oil If all seem functional but you can’t shift to one gears to the next before you change your transmission. You can try before changing your transmission a transmission conditioner. TranX or Lucas transmission fix.

              #533450
              garygary
              Participant

                I solved the problem. I am not quite used to cable operated front wheel drive vehicles. i loosened the clutch cable and now it works beautifuly. Thank you for the sugjestions

                #533475
                college mancollege man
                Moderator

                  Glad you solved the issue. 🙂

                  #533944
                  MathieuMathieu
                  Participant

                    Good thing to know !

                  Viewing 7 replies - 1 through 7 (of 7 total)
                  • You must be logged in to reply to this topic.
                  Loading…
                  toto togel situs toto situs toto