Menu

cert ford tech here looking to help

Home Forums Stay Dirty Lounge New Member Introduction cert ford tech here looking to help

  • Creator
    Topic
  • #460945
    jlc429jlc429
    Participant

      i have some problems with my 98 ranger 4.0 4×4 the ac turns to heat when in strain and at higher rpms the blend door just opens up could the blend door be bad or should i look for vacum leaks if leaks how thanks

    Viewing 9 replies - 1 through 9 (of 9 total)
    • Author
      Replies
    • #460946
      DJTHEFORDMANDJTHEFORDMAN
      Participant

        under the pass side dash there is a vacuum plug sometime people kick this plug loose check that. Also the a/c shuts off at high rpms.its designed too. so what rpms is it shutting off. What exactly is going on??

        #460948
        jlc429jlc429
        Participant

          2500 to 3000 really reg driving range everything else is good put new dryer in a few months ago and just havent worried about it but wit 100 degree weather its a nice thing to be able to cut the ac on after a hot day

          #460947
          dreamer2355dreamer2355
          Participant

            Welcome to the forums DJ!

            #466527
            DJTHEFORDMANDJTHEFORDMAN
            Participant

              could be the a/c relay or a/c cycling switch.or compressor lock up..

              #466617
              DJTHEFORDMANDJTHEFORDMAN
              Participant

                could be the a/c relay or a/c cycling switch.or compressor lock up..

                #466553
                davedave
                Participant

                  i just have 2 simple questions for ye’

                  1) what is your overall opinion of a 2003 crown vic CVPI? I got one with 80k miles on it and it runs great. Any known problems that i should be aware of..?

                  2) would you recommend for or against specializing in ford vehicles as a viable career move coming right out of auto tech school?

                  #466647
                  davedave
                  Participant

                    i just have 2 simple questions for ye’

                    1) what is your overall opinion of a 2003 crown vic CVPI? I got one with 80k miles on it and it runs great. Any known problems that i should be aware of..?

                    2) would you recommend for or against specializing in ford vehicles as a viable career move coming right out of auto tech school?

                    #466581
                    DJTHEFORDMANDJTHEFORDMAN
                    Participant

                      YES FORD IS A GREAT COMPANY AND THERE IS ALWAYS WORK OUTSIDE AND INSIDE…I LOVE THAT FACT THAT IM A SPECIALTY ONLY..BUT YOU DO GET WORK ON THERE MAKES AND MODELS…I WOULD HIGHLY RECOMMEND GOING THREW FORD..

                      #466676
                      DJTHEFORDMANDJTHEFORDMAN
                      Participant

                        YES FORD IS A GREAT COMPANY AND THERE IS ALWAYS WORK OUTSIDE AND INSIDE…I LOVE THAT FACT THAT IM A SPECIALTY ONLY..BUT YOU DO GET WORK ON THERE MAKES AND MODELS…I WOULD HIGHLY RECOMMEND GOING THREW FORD..

                      Viewing 9 replies - 1 through 9 (of 9 total)
                      • You must be logged in to reply to this topic.
                      Loading…