Menu

carburetor help

  • Creator
    Topic
  • #460928
    SuperTechJeff16415SuperTechJeff16415
    Participant

      I would need pictures of the rods and the carb. I have very limited experience with them.

    Viewing 15 replies - 1 through 15 (of 15 total)
    • Author
      Replies
    • #460929
      SarahCrazinessSarahCraziness
      Participant

        ill upload them tomorrow, i hope you know something lol i dont wanna put it together wrong

        #460930
        Trcustoms719Trcustoms719
        Participant

          We’ll figure it out once

          #460931
          moparfanmoparfan
          Participant

            there is only one vacum port that ant full vacum all the time and it is only cut from vacum at idle. this one goes to your vacum advance. the rest pretty much go where they fit hose size wise. the quadrajet had a few minor changes threw the years so i wou

            #460932
            EricTheCarGuy 1EricTheCarGuy
            Keymaster

              +1 I guess we’re visual people that need pretty pictures to look at.

              #460933
              SarahCrazinessSarahCraziness
              Participant

                been a busy girl the last couple days sorry guys, i uploaded the photos take a look and tell me if u can make heads or tails? i forgot where the black bar went

                #460934
                619DioFan619DioFan
                Participant

                  Sorry , but I do not see any photos. see if you can load them again.

                  #460935
                  moparfanmoparfan
                  Participant

                    Quoted From 619DioFan: _x000D_
                    _x000D_
                    Sorry , but I do not see any photos. see if you can load them again.

                    _x000D_
                    _x000D_
                    they are on her profile. _x000D_
                    _x000D_
                    _x000D_
                    im trying to find you a pic that shows that rod location. not much luck yet but i will keep trying.

                    #460936
                    moparfanmoparfan
                    Participant

                      Quoted From SarahCraziness: _x000D_
                      _x000D_
                      been a busy girl the last couple days sorry guys, i uploaded the photos take a look and tell me if u can make heads or tails? i forgot where the black bar went

                      _x000D_
                      _x000D_
                      go here http://www.autozone.com/autoz

                      #460937
                      SarahCrazinessSarahCraziness
                      Participant

                        thanks guys =) time to put the last piece on and test it out, anyone want pics of the engine with the intake off while its still off?

                        #460941
                        SarahCrazinessSarahCraziness
                        Participant

                          sweet i see where its going =) alright completing it finally take 2! lol ill let ya know how it works but ill probly be putting the carb and all together when its a lil cooler cuz its 104

                          #460942
                          Trcustoms719Trcustoms719
                          Participant

                            [quote]Quoted From SarahCraziness: _x000D_
                            _x000D_
                            sweet i see where its going =) alright completing it finally take 2! lol ill let ya know how it works but ill probly be putting the carb and all together when its a lil cooler cuz its 104

                            #460938
                            dreamer2355dreamer2355
                            Participant

                              Sure, pictures are always fun.

                              #460939
                              SarahCrazinessSarahCraziness
                              Participant

                                only problem with the diagram is i have the Oldsmobile carb that’s straight instead of the 90 degree angle fuel inlet, trying my best to make heads or tails of it but this just kills me lol im one piece away from being able to throw it in my car and can’t

                                #460940
                                moparfanmoparfan
                                Participant

                                  [quote]Quoted From SarahCraziness:_x000D_
                                  _x000D_
                                  only problem with the diagram is i have the Oldsmobile carb that’s straight instead of the 90 degree angle fuel inlet, trying my best to make heads or tails of it but this just kills me lol im one piece away fr

                                  #460943
                                  EricTheCarGuy 1EricTheCarGuy
                                  Keymaster

                                    That’s an old MC dwell set up, in fact you could almost call it the grandfather of the electronic fuel injector.

                                  Viewing 15 replies - 1 through 15 (of 15 total)
                                  • You must be logged in to reply to this topic.
                                  Loading…