- This topic has 10 replies, 4 voices, and was last updated 11 years, 4 months ago by .
-
Topic
-
hello i have a 98 honda accord. a week ago i finish replacing a cylinder head on my car, ever since i finished that the car is stalling. i used to have this problem in the past, but it got worst. i was checkin my car today because i refuse to take it to the mechanic and waste more money that i have. i found out that i reconnect wrong a few plugs. that was the plug from the cooling fans and the one from the vtec.(no wonder why the fans were always on and same reason why i have a p1259 code corresponding to the vtec solenoid.) well i fix that just by switching those plugs, but the real problem of the stalling was there until a disconnected the fuel pressure regulator by accident, and a noticed a change in the engine revving. i rushed to the inside of the car and i hit the accelerator and no more stalling. note that the vacuum hose from the regulator is disconnected. so my question is is the fuel regulator is bad or is there any way how to test the regulator to see if it bad. i don’t want to spent money on new part just to find out that is not the problem.
:stick:
- You must be logged in to reply to this topic.