- This topic has 2 replies, 2 voices, and was last updated 11 years, 3 months ago by
.
-
Topic
-
Hi guys,
I had been replacing all the rear suspension due to worn rubber/rust/mileage. While I was under the back I went to check on the parking brake as it hasn’t been working very well. When I took the brake shoes off, the adjusting screw on one side just fell out. Inside the adjusting screw was the bolt for it. I don’t know much about e-brakes, but I am assuming that bolt was supposed to be attached to the knuckle. Is this correct and I need both a new knuckle and e-brake kit?
Or is the adjusting screw not directly attached to the knuckle and I just need the e-brake kit?
-
Replies
-
Thank you; I hadn’t seen this for the model I have, and didn’t look at the ’05 as they changed the model. It looks similar enough. I will compare it tonight with the car and see if it helps. I did not take anything apart yet as I was hoping to order parts first. I guess I will have to see what is needed though.
- You must be logged in to reply to this topic.