- This topic has 1 reply, 2 voices, and was last updated 8 years ago by .
-
Topic
-
hey guys,
i installed coilovers on my car about a year ago in the process of doing so, the torque on my impact gun was too high. it snapped the stud right off the chassis. there is 2 studs for the strut. what i did to fix the problem was cutting off the broken stud completely then drilling a 3.8” hole. i put a 1/4” bolt through the hole with a washer then a nut to hold up the strut. but im hoping there is something else i can do because the entire bolt would turn when i try to tighten it or take out the strut also over time maybe every month it gets loose and it rattles which is really annoying.
Note: the studs are not on the strut mount.
i will try to get some pics
it is a
2010 Nissan Maxima
- You must be logged in to reply to this topic.