blinkers

[roger]

rear back blinker/brake light and hazard light won,t work passenger side did work good,i checked the bulb,checked the connector no juice
put a new ground in still doesn,t,trying to get a sticker but can,t because of this,need help anyone got an idea,thanks for looking
this is a 2000 dodge dakota 4×4 6 cyl

Topic

[Dave Tidman]

A wiring diagram will be your friend here. First check would be fuses. If none blown start following the wiring harness back and check all the connectors, etc for damage or corrosion. Keep working back until you find 12V, then you know the issue is between that point and the last point you checked.

If fuses are blown, same procedure, look for chafing in the wires.

I’m not familiar with the dodge setups, but if there is a common connector to the taillight assembly, that is a likely spot to have an issue. Does the reverse light work?
Good luck!

[roger]

tail light works,fuses good,reverse light works

[roger]

it was a broken wire at the connector all good now thanks for the help

[roger]

works now broken wire at the connection,thanks for the info

[Dave Tidman]

cool, glad you found it.

[Author]

Replies