- This topic has 1 reply, 2 voices, and was last updated 10 years, 3 months ago by .
-
Topic
-
Waiting for my parts guy to bring another but I thought I would share this, I’m doing a four wheel brake job on a one ton dump truck and decided I did not like the feel of the rear calipers, long story short I like to test fit these shim style ones before I cut the rotors etc and ran into this ” over welded ” one that seemed to slip thru the inspection process at over 1/8″ too big. This seems to be an isolated incident but something to watch out for.
- You must be logged in to reply to this topic.