- This topic has 5 replies, 3 voices, and was last updated 9 years, 3 months ago by
.
-
Topic
-
I have a Nissan 2007. Problem i am having is when slightly touching brakes the brakes start pulsating. Seems a little to sensitive, Sensors have been cleaned. I am not getting an ABS light on. Drums rotors and shoes have been replaced. Thinking its a defective sensor. Anyway to check this without going to garage.
-
Replies
-
What model, engine and mileage? When you say pulsating, is it the ABS pulsating (do you hear the ABS module clicking)?
If you had a bad ABS sensor, you would have an ABS light, seems like something else is going on. Stupid question, is the ABS bulb OK?
Try disabling the abs system by maybe a fuse or pulling a plug on the abs module and see if it is really the abs thats pulsating. Isolate and narrow down your search to the cause.
It might, but you’ll know for sure it’s the abs system and nothing else. Once you reconnect the module or fuse which ever way you disable the abs after a couple of drive cycles or even disconnecting the battery for a minute should reset the abs light if it turns on.
- You must be logged in to reply to this topic.