- This topic has 14 replies, 7 voices, and was last updated 11 years, 11 months ago by
.
-
Topic
-
-
Replies
-
[quote]Quoted From moparfan: _x000D_
_x000D_
there is a pressure switch in the A/C system so if the pressure gets to low it turns off the pump. this help prevent pump damage. you can manualy hook power to the pump just to test the clutch assembly but you do nook so i need to take the truck to a shop to get it recharged and stuff, but what about the car? It has never been open and it is charged to where it is supposed to be.
Quoted From zeo_nanomus: _x000D_
_x000D_
ok so i need to take the truck to a shop to get it recharged and stuff, but what about the car? It has never been open and it is charged to where it is supposed to be._x000D_
_x000D_
how do you know the car has a fuYou may be able to engage the compressor clutch from the compressor relay but you will need the pin out and wiring diagram
Yes, no refrigerant in the truck will not allow the hi and low pressure sensors to allow A/C clutch to engage.
Honestly AC work is really not for the DIY as it does require a certain amount of expertise and specialized
I have honestly given up on the A/C pump problem. Thanks to all who posted but I’m just going to save up to take it to someone who knows better than me.
I have honestly given up on the A/C pump problem. Thanks to all who posted but I’m just going to save up to take it to someone who knows better than me.
- You must be logged in to reply to this topic.