Menu

99 Civic SI starter issue?

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › 99 Civic SI starter issue?

  • Creator
    Topic
  • September 17, 2013 at 4:33 am #544772
    StephenStephen
    Participant

      The clutch on my 99 Honda Civic SI is going bad so I was going to change it today but after removing the two starter bolts the starter will not come out? It is solid not even a wiggle so what can cause this and how can I get it out Thanks.

    • Creator
      Topic
    Viewing 7 replies - 1 through 7 (of 7 total)
    • Author
      Replies
    • September 19, 2013 at 11:14 am #545211
      Jeff M.Jeff M.
      Participant

        Isn’t there a bracket with a fastener holding a cable right above it ?

        September 19, 2013 at 2:29 pm #545239
        StephenStephen
        Participant

          Yeah I have that off also. I will do some more looking at it tomorrow.

          September 19, 2013 at 7:55 pm #545253
          college mancollege man
          Moderator

            looks like two fasteners. you may need to tap on the starter.

            http://www.justanswer.com/honda/2bvdb-change-starter-1999-honda-civic-dx.html

            September 20, 2013 at 3:47 am #545310
            StephenStephen
            Participant

              I have the two bolts off and hitting the starter with a punch and hammer still nothing. Iam so confused never had this happen before. Is the starter corroded to the trans?

              September 20, 2013 at 4:07 am #545312
              college mancollege man
              Moderator

                Its gotta be corrosion. soak the flange to housing
                with wd-40 or penetrating oil.Can you drive something
                between the flange and the housing?

                September 21, 2013 at 11:25 pm #545635
                Jeff M.Jeff M.
                Participant

                  I was about to ask if you had gotten it off yet but,I figured you would’ve said by now if you had… banana:

                  September 24, 2013 at 1:06 am #546091
                  EricTheCarGuy 1EricTheCarGuy
                  Keymaster

                    There are only 2 fasteners holding the starter in. If you’re having trouble getting it out, then it’s likely to be corrosion OR it was not installed correctly and is bound up in it’s place. Hopefully you don’t damage the starter trying to remove it. Good luck and keep us posted.

                  • Author
                    Replies
                  Viewing 7 replies - 1 through 7 (of 7 total)
                  • You must be logged in to reply to this topic.
                  Loading…
                  toto togel situs toto situs toto