Menu

’99 Civic Head Replacement, What Else?

Home › Forums › Stay Dirty Lounge › Service and Repair Questions Answered Here › ’99 Civic Head Replacement, What Else?

  • Creator
    Topic
  • June 11, 2015 at 3:56 pm #666245
    Nathan PageNathan Page
    Participant

      My 1999 Civic needs the head replaced due to the camshaft reaming out the grooves it rides in. I’m replacing it with a remanufactured one so most of the replaceable parts in the head will not need replacing. My question is what else I should do while I’m in there. Since I’ll have everything taken down this much, is there anything else I should do? Going to replace the timing belt and obviously all the gaskets involved.

      Thanks in advance.

    • Creator
      Topic
    Viewing 2 replies - 1 through 2 (of 2 total)
    • Author
      Replies
    • June 11, 2015 at 4:00 pm #666246
      Nathan PageNathan Page
      Participant

        Thought I should add that this is a d16y7 and manual transmission.

        Sent from my SM-T530NU using Tapatalk

        June 11, 2015 at 4:38 pm #666247
        Andrew PhillipsAndrew Phillips
        Participant

          If the accessory drive belt and radiator hoses are over 2-3 yrs old, put new ones on instead of reinstalling the old. You may want to replace the thermostat too, and also the water pump while doing the timing belt. Make sure to install a new tensioner with the new timing belt.

        • Author
          Replies
        Viewing 2 replies - 1 through 2 (of 2 total)
        • You must be logged in to reply to this topic.
        Loading…
        toto slot toto togel situs toto situs toto https://www.kimiafarmabali.com/
        situs toto situs toto