- This topic has 8 replies, 5 voices, and was last updated 11 years ago by
.
-
Topic
-
guys I need help very bad 🙁 … I know how to get to my manual window regulator on my 99 civic dx sedan … sooo today I got the door panel off and then took off my broken window regulator …. my problem lies in installing the new manual regulator .. I cant figure out which direction to put the window crank and cant figure out where the holes match up to take the 10mm bolts … If anyone could help me I’d love it .. my glass right now is being held up by 2 pieces of wood jammed into weather stripping.. I bought a “Dorman” replacement manual regulator for my 99 civic sedan.
Please Help
-
Replies
-
Ive never worked on honda interior can you post a pic of the door and the regulator and do you not remember how the old one was mounted?
yes its drivers front door … sorry I didnt take a pic last night .. gotta go to work here in a few .. when I get off today if I cant figure out how to install I’ll send a pic
Well first compare the old and the new cranks.
See if the tapped mounting holes have the same spacing.
If not, you will have to drill new holes in the door inner frame to match the new regulator.
Otherwise it should just fit and bolt right in.
I got it guys … It installed vertically with a tiny bit of tilt … right when I flipped it vertical .. everything fell into place and the every bolt hole lined up .. got the right bolts holding glass to regulator too… for the 1st time in 6 years I can roll my window up!!! hell yea!
thanks guys I appreciate you all
- You must be logged in to reply to this topic.