- This topic has 2 replies, 3 voices, and was last updated 10 years, 10 months ago by
.
-
Topic
-
hey guys new to the forum, sorry if this is the wrong section wondering if I build my own header for my car where or what should I do with my 02 sensors I know upstream should go pretty well the same distance from the block but downstream any tips or measurements? the reason im doing this is cause the guy I bought it from before had a (HALF) of a turbo bugger welded to the side of the catalytic converter and didn’t gut the cat so the turbo was just robbing power like crazy and plugged the exhaust solid I’ve attached
a picture so you guys can see the “awesome” :blink: turbo
-
Replies
-
You can get a moduleaftermarket sensor to fool the computer. They just plug right into your factory o2 sensor pigtail.
Obviously you are keeping the turbo. Just get and older manifold and make a spacer similar to the one on the picture. A friend of mine put a volkswagen turbo and just fitted it to its need on and old 1.5…. work good but you will need tuning anyway… which was probably the reason why he fried his converter…. and his home made modification is pretty redneck by the way 😉
- You must be logged in to reply to this topic.