- This topic has 18 replies, 4 voices, and was last updated 11 years, 6 months ago by
.
-
Topic
-
I have a 98 honda accord and it is leaking oil under my distributor and I have replaced my valve cover gasket, distributor o-ring, my distributor, new inner seal, oil pressure switch gasket, and vtec solenoid gasket both of them. Idk what to do. I believe it is my camshaft seal but i do not know exactly where it is.
I will probably be posting pictures soon
-
Replies
-
Yes but the cam should stick out of both sides of the cylinder head – requiring 2 seals, I believe – correct me if I’m wrong.
I can’t find a part number for that side of the head though. Is it an LX, EX, 2,4 door? I know that cam cap comes off though, it’s just really stuck on there.
Hmmm….I still can’t find a seal for there at any part’s site.. Sorry I couldn’t help you more. If you want to try again that cap should come up you just really have to give it a good jam. Probably a strong flat-head with a hammer.
If its not leaking from there, Spray down the whole area and start the engine look for leaks, drive it around a little and look to see if you can see where it’s leaking from. Take ETCG’s advice and look into that too.If your still having trouble bring it to Honda/Independent Shop. Good luck!
- You must be logged in to reply to this topic.