- This topic has 4 replies, 5 voices, and was last updated 10 years, 6 months ago by
.
-
Topic
-
Im trying to get my girlfriends 97 Mazda 626 dx/lx working and it needs a variety of things. One being a master cylinder. But I don’t know if it has abs and apparently advance auto parts needs to know. I don’t have access to the car right now but I need to find parts.
Bottom question: does this car have abs?
vin: 1YVGE22C0V562
-
Replies
-
When you can. Check the master cylinder lines to see if they
go to a module/box around the master. if so it has abs. if not
then no abs.I would call the Mazda dealer with that VIN. They should be able to put that in their system to find out if it has ABS or not.
Keep us posted.
I know this topic is old but it might help others in the future.
The ABS pump on the 93-02 Mazda 626 is located below the brake fluid reservoir. It will look like a huge RECTANGULAR block of aluminum with a bunch of brake lines going into it like dreadlocks. It will be down next to the driver-side strut tower in the engine bay. If you have ABS then looking for the pump is the most definitive way to check for it.
Most axles these days for the 626 have ABS tone rings regardless if the vehicle has ABS or not. Tone rings on the axle is not a good way to check if you have ABS because of that. Best way is to look for that ABS pump.
- You must be logged in to reply to this topic.